Inclinometer Monitoring

is a geotechnical method used to track horizontal displacements within the ground or retaining structures. It is essential for monitoring slope stability, deep excavations, and the performance of earth-retaining systems over time.

How it works

Inclinometer casings are installed vertically in boreholes or structures. A probe equipped with precision sensors is periodically lowered into the casing to measure lateral movement along the depth. Changes in displacement indicate ground deformation or structural movement.

Casing installation

A grooved inclinometer tube is installed in a drilled borehole or embedded in a structure.

Initial baseline reading

A reference measurement is taken shortly after installation for comparison with future data.

Repeated measurements

The probe is inserted at regular intervals to detect and track horizontal movements over time.

Data interpretation

Displacement profiles are analyzed to assess ground movement and structural behavior.

Process steps

This method is widely used for long-term monitoring of geotechnical risk zones and excavation sites.

Drill and install casing

Prepare monitoring point

Boreholes are drilled and inclinometer casings are securely placed and aligned vertically

Conduct baseline survey

Establish reference

An initial measurement is taken to serve as the baseline for all future readings.

Perform routine monitoring

Track displacements

The probe is used periodically to collect data on horizontal ground or wall movements.

Analyze and report

Evaluate risks

Data is processed to identify trends, thresholds, and potential instability.

Benefits

Early warning system

Detects subsurface ground movements before surface failure occurs.

Reliable and precise

High-resolution sensors provide accurate displacement data

Long-term monitoring

Suitable for ongoing observation during and after construction.

Geotechnical insight

Supports design validation and safety assessments.

Where it applies?

Geotechnics

Infrastructure

Railways

Energy construction

Have Questions? Contact Us

Frequently Asked Questions

How often should inclinometer readings be taken?

Frequency depends on project phase and risk level—typically weekly or monthly.

What level of movement can be detected?

Most systems detect displacements as small as 0.1 mm with high reliability.

See our reviews

Lorem ipsum dolor sit amet, consectetur adipiscing elit.

Korem ipsum dolor sit amet, consectetur adipiscing elit. Nunc vulputate libero et velit interdum, ac aliquet odio mattis. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Curabitur tempus urna at turpis condimentum lobortis. Ut commodo efficitur neque. Ut diam quam, semper iaculis condimentum ac, vestibulum eu nisl.

Name Surname 1

Position, Company name 1

Name Surname 2

Position, Company name 2

Name Surname 3

Position, Company name 3

Name Surname 4

Position, Company name 4

Case studies

Filter by service:

Sorry, nothing to see here...

Knowledge Base

Tutaj znajdziesz kluczowe materiały techniczne, w tym instrukcje, artykuły eksperckie i dokumentację. Udostępniamy rzetelne informacje wspierające inżynierów i inwestorów w podejmowaniu świadomych decyzji. Skorzystaj z wiedzy, która pomaga w planowaniu, realizacji i eksploatacji konstrukcji.